PRESSURIZATION UNIT
 |
|
Single pump |
|
Application
Pressurisation unit is used for adding the water to the pressurized system. Whenever the system pressure falls below the minimum recommended set point, the pressure switch activates the pump . Special multi-stage pump with sufficient capacity to overcome the system pressure is used.
Components
- Pressurization pump
- Pressure gauge
- Pressured switch
- Isolation valves
- Non-return valve
- Inter connecting piping
|
Benefits

- |
reduced pipe corrosion |
| - |
reduced sludge formation |
| - |
reduced scaling and heat transfer equipment |
| - |
reduced descaling down time |
| - |
reduced failure of controls and instruments |
| - |
improved plant performance |
| - |
reduced maintenance costs |
|
Dimensions
GA drawing
Wiring diagram
|

|
Pump:
| Type |
| Power supply |
| Power consumption |
| Insulation |
| Protection |
| Speed |
|
| Multistage, Centrifugal |
| 220VAC, 50 HZ, 1 Ph |
| 0.60 kw |
| Class 'B' |
| IP44 |
| 2900 rpm |
|
|
Pressure switch:
| Pressure setting range |
| Max. flow |
| Max. dynamic head |
| Inlet pipe size |
| Outlet pipe size |
|
| 2.8 - 7.0 bar |
| 70 LPM |
| 50m |
| 25 mm dia |
| 25 mm dia |
|

|
Anergy Instruments Pvt. Ltd., 40, Sector - 27 A, Faridabad - 121 003, India
Tel 91-129-4045091, 2276589
Fax 91-129-2276482
Email info@anergy.in
|
 |
|